|
|
![]() TM 9-4940-544-14&P
Portable Hose Assembly Machine
Description & Specifications
Specifications
Motor . . . . . . . . . . ..115v, AC (only) 25-60 Hz
Description
reversible universal
(230v optional)
The Portable Hose Assembly Machine (Fig. 1) is
designed for low production assembly of hose and
Selector Switch. . . . . . . . . REV/OFF/FOR, heavy-duty
reusable fittings in sizes from
through
Foot Switch. . . . . . . . . . . on-off motor control
in the single wire braid style, and from
Chuck . . . . . . . . . . . . . wrench-type, universal
through 2" in the double wire braid and 4 spiral
wire styles. This machine will accommodate male
Power Source . . . . . . . . . . .. .30 amp rated circuit
pipe, swivel, flange and elbow type fittings.
Weight w/o Stand. .. . . . . . . . . . . . . . ..141 lbs.
Power is supplied by a 115 Volt A.C. (only)
Dimensions w/Stand:
25-60 Hz Universal Motor. The characteristics of
Length . . . . . . . . . . . . . . . . . . . . .. . . . . . ........ . . . .
56 in.
this motor are such that the speed decreases as
Width . . . . . . . . . . . . . . . . . . . ..46 in.
torque output increases. A motor is also available
Height ... . . . . . . . . . . . . . . . . . ..45 in.
for 230 Volt operation. A mechanical interlock with
Jaw Insert Capacity. . . . . . . . . .
through 2"
selector switch prevents starting machine with top
Sockets and Fittings
guard open and from opening top guard while
machine is operating.
This machine is compact, lightweight, and highly
Accessories
portable. Machine can be bench mounted, or if
No. 1206HM Stand. . . . . . . . . . . . folding w/tray
portability is needed, a folding leg stand is avail-
Weight . . . . . . . . . . . . . . . . . . . ..29 1bs
able. With it, complete hose assemblies can be
turned out quickly and easily, helping to reduce
downtime and avoid delays.
Safety Precautions
1. Know your machine. Read Instruction Manual
carefully. Know the limitations, as well as, the
specific potential hazards peculiar to this
machine.
2. Avoid accidental starting. Make sure Foot
Switch operates freely before plugging in
Power Cord.
be grounded while in use to protect the opera-
tor from electric shock. The machine is equip-
ped with an approved three-conductor cord and
three-prong grounding type plug to fit proper
grounding type receptacle. The green (or green
and yellow) conductor in cord is the grounding
wire. Never connect green (or green and yel-
low) wire to a live terminal. If your unit is for
use on less than 150 volts, it has a plug like
that shown in Panel "A", (115v). If it is for use
on 150 to 250 volts, it has a plug like that
shown in Panel "A", (230v).
4. Remove tools from machine. Form habit of
checking to see that machine is clear of
wrenches or other tools before operating.
and Stand.
7
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |