ASSEMBLY AND OPERATIONAL TESTING

TM 9- 2990- 205- 34&P

ASSEMBLY AND OPERATIONAL TESTING

0012 00

THIS WORK PACKAGE COVERS:

Assembly and Operational Testing

INITIAL SETUP:

Tools and Special Tools

Materials/Parts

General mechanic's tool kit (item 1, WP 0017 00)

Oil drain tube gasket (Figs 2 and 3, item 54, WP

Installing sleeve (Fig 4, item 3, WP 0015 00)

Retaining ring pliers (Fig 4, item 2, WP 0015 00)

Equipment Condition

Box end wrench (special tool) (Fig 4, item 4,

Turbo components on work bench; cleaned, inspected

and repaired

5/8 inch, 1/2 inch drive deep well socket (item 8,

9/16 inch, 1/2 inch drive deep well socket (item 9,

Feeler gages (item 10, WP 0017 00)

3/8 inch crowfoot attachment (item 11, WP 0017 00)

NOTE

Assemble the turbo according to the following procedures. Use special care to ensure the

cleanliness of each part. Coat each part with a light film of engine oil (OE/HDO) immediately

before installation.

All parts discarded during disassembly are replaced with new parts during assembly. Requi-

sition turbosupercharger parts kit, part number 5705073. Refer to WP 0015 00. All kit parts

listed in the Repair Parts and Special Tools List for your configuration of turbo ("clean air" or

standard) must be used during assembly.

0012 00- 1