Repair of the Turbine Housing.

TM 9- 2990- 205- 34&P

REPAIR OF COMPONENT PARTS - CONTINUED

0011 00

2. Repair of the Turbine Housing.

a. Smooth small nicks or raised metal using a fine hand file.

b. Remove and discard loose or damaged studs (1) using stud remover and setter.

Using stud remover and setter, install coarse thread end of new stud, part number C157415, to a setting

height of 1.00 inch (25.4 mm).

d. Repair damaged threads using a 3/8--16NC thread tap.

03i486m

3. Repair of the Oil Drain Tube and Shield.

Minor bends in the oil drain tube and shield can be straightened as long as the integrity of the part remains intact.

4. Repair of the Bearing Housing, Mounting Legs, and Turbine Backplate.

Slight nicks on the mating surfaces of these components can be smoothed using a hand file. Re--tap threaded

holes, if damaged.

END OF WORK PACKAGE

0011 00-114 0-ank

00-3/ 0bl-3