ASSEMBLY OF DRIVE CLUTCH AND LEVER HOUSING

32. ASSEMBLY OF DRIVE CLUTCH AND

applied in direction of torque. Torque

LEVER HOUSING

is counterclockwise as viewed from

p i n i o n end.

a. Assembly of Drive Clutch. Refer to fig-

ures 29 and 30 and assemble the drive clutch.

After clutch has been assembled, it must be

(2) With clutch held stationary, twelve

checked for slippage.

pounds pressure must be required to

move pinion to "stop" position, with a

(1) With clutch held stationary, the pinion

16 degree, 15 minute clockwise motion

must slip when 4000 pound-inches is

viewing pinion end.

FIGURE 30. ASSEMBLING EXTERNAL PARTS OF DRIVE CLUTCH ASSEMBLY.