Terminal Plate Assembly.

TM 9- 2920- 232- 34&P / TO 38X14- 2- 32

- -

ASSEMBLY OF THE STARTER - CONTINUED

0010 00

2. Terminal Plate Assembly.

a. Align terminal insulators (1 and 2) and terminal plate (3) with bushings (4 and 5) in place on insulator (6).

Install threaded terminals (7) through terminals (8) and through aligned parts. Secure parts together with

washer nuts (9). Torque to 12--15 lb--in (1.4 to 1.7 Nm).

b. Install washer nut (10). Torque to 12--15 Ib--in (1.4 to 1.7 Nm).

Align BAT terminal stud (11) in terminal lug (12) and align MTR terminal (13) so that longer dimensions on

heads are parallel as threaded ends are installed through previously assembled parts.

d. Secure terminals (11 and 13) with flat washers (14), new lock washers (15), and nuts (16). Torque to 15--25

lb--ft (20 to 34 Nm).

e. Install washer nut (17). Tighten finger tight.

0010 00- 4