Coat threads of pole shoe screws

TM 9- 2920- 232- 34&P / TO 38X14- 2- 32

- -

ASSEMBLY OF THE STARTER - CONTINUED

0010 00

Coat threads of pole shoe screws (14) with sealing compound, and use two of these screws to attach each of

six pole shoes (15) inside the frame (5). Torque pole shoe screws to 15--25 lb--ft (20.3 to 34.5 Nm).

CAUTION

Do not overcoat pole shoe faces with varnish. Coating faces could cause armature rub.

g. Coat inside of frame (5) with varnish. Cover field windings (4), pole shoes (15) and insulator plates (11), but

leave 0.4 inch of inner frame surface without varnish around each end of frame.

h. Install bracket (16), new lock washer (17), and nut (18) but do not tighten until the solenoid assembly is

installed.

0010 00- 3