Installation of Timing Device Assembly.

TM 9-2910-226-34

(4) Refer to figure 3-123. Lubricate and install

(3) Refer to figure 3-124. If hydraulic head ,

packing (G) on pin-(H). Install washer (E) on screw

assemblies HD9070A or HD9085A with an oil duct

(F) and assemble pin and screw. Install screw

are replaced by a later model hydraulic head

assembly in pump housing and torque tighten to 20-

assembly, it will be necessary to plug the oil duct in

25 foot-pounds.

the pump housing utilizing kit 5704374. Refer to

table 3-2 to determine correct hydraulic head ap-

plication.

Figure 3-124. Identification of hydraulic heads with oil lubrication

ducts.

Table 3-2. Selection of Hydraulic Head

3-41. Installation of Timing Device Assembly.

camshaft. Remove fuel injection pump from fixture

and then remove fixture from vise.

a. Assembly.

(1) Refer to figure 3-125. Install woodruff key on

3-75