Figure 3-107. Installing camshaft ball bearing on camshaft using remover and replacer.

TM 9-2910-226-34

b. Inspection and Repair. Inspect and repair the

cam shaft assembly as follows:

(1) Examine the bearing surfaces of the

cam shaft (H- 1, fig. 3-109) for scratches and wear

patterns. Minor scratches may be removed with

crocus cloth. When wear patterns are visible, replace

the camshaft. Check the camshaft against the limits

specified in the repair standards (para 3-60) and

replace when it does not meet these requirements.

(2) Check the camshaft ball bearing (G-2, fig. 3-

109) against the limits specified in the repair

standards (para 3-60) and replace when it does not

meet these requirements. Refer to TM 9-214 for care

and maintenance of ball bearings.

c. Assembly. Assemble the camshaft assembly as

follows:

(1) Refer to figure 3-107. Position remover and

replacer on camshaft (A) in an arbor press and install

camshaft ball bearing (B) with retianing ring groove

away from camshaft as shown.

Figure 3-107. Installing camshaft ball bearing on camshaft using

remover and replacer.

3-66