Figure 3-86. Identification of oil baffles.

TM 9-2910-226-34

(D). Insert a feeler gage (E) to obtain a clearance of

0.002 to 0.004-inch between the operating lever and

operating shaft bearing; move lever as necessary to

obtain this clearance, Torque tighten nut (C) to 70-

75 inch-pounds. Install dust cover, lockwasher and

machine bolt; refer to ((17) above). Check operating

lever clearance at dust cover ((18) above).

Figure 3-86. Identification of oil baffles.

Figure 3-85. Installing operating lever using a feeler gage

(code A pumps).

3-56