Figure 3-73. Adjusting smoke limit cam angle.

TM 9-2910-226-34

NOTE

Install cotter pin from bottom and spread prongs

Paragraphs (4), (5) and (6) do not apply to

tightly around the rod pin screw.

NOTE

code A injection pumps.

After assembly, place fulcrum lever in

(4) Refer to figure 3-74 and install fulcrum lever

assembly in governor housing. Fulcrum lever pivot

vertical position. Raise fuel control rod to a

pins must have a dimension (X) (fig. 3-67) of 0.165.

horizontal position. When free, fuel control

rod should drop slowly of its own weight.

Figure 3-74. Installing fulcrum lever and associated-sin

governor housing.

Figure 3-73. Adjusting smoke limit cam angle.

3-50