 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 T M 9-2835-255-34
STARTER MOTOR REPAIR (Sheet 10 of 11)
2. INSTALL DRIVE HOUSING (1) AND NEW
PACKING (2). INSTALL AND TORQUE SIX
SCREWS (3) BETWEEN 156-180 LB-IN
(18-23 NZm).
a. Apply grease to packing (2) and install in
drive housing groove (4).
b. Put motor (5) in vise.
c. Aline scribe marks on housing (1) and
shift housing (6) and push together.
d. Apply sealing compound to screws (3) and
install.
e. Torque screws (3) between 156-180 lb-in
(18-23 Nm).
3. INSTALL END HOUSING (7), NEW
PACKING (8), JUMPER (9), AND
HANDLE (10).
a. Apply grease to packing (8) and install in
groove (11).
NOTE
Model MC has built in jumper (9), If working on
model MC, do step b.
b. Aline eight holes (12) in jumper (9) and
housing (7) and install jumper (9).
c. Put washer (13) on shaft (14) and bearing
(15) on bushing (16).
d. Aline scribe marks on ring (17) and
housing (7). Install housing (7) on shaft
(14) and in ring (17).
e. Apply sealing compound to four screws
(18). Install screws (18), new lockwashers
(19), and handle (10).
Go on to Sheet 11
9-60
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals