STARTER MOTOR SOLENOID SWITCH REPLACEMENT (Sheet 1 of 3)

TM 9-2835-255-34

STARTER MOTOR SOLENOID SWITCH REPLACEMENT (Sheet 1 of 3)

APPLICABILITY: Starters MO017414MA, MB, AND MC

TOOLS: Automotive fuel and electrical system repair tool kit (SC 5180-95-CL-B08)

General mechanic's tool kit: automotive (SC 5180-90-N26)

Chemical and oil protective gloves (Item 87, Appendix D)

Conduit style slip joint pliers with plastic jaw inserts (Item 31, Appendix D)

Deep style socket, 1/4-inch drive, l/4-inch (item 77, Appendix D)

Extension, l/4-inch drive, 6-inch (Item 80, Appendix D)

Industrial goggles (Item 58, Appendix D)

Machinist's vise (Item 55, Appendix D)

Plier wrench (Item 84, Appendix D)

Torque wrench, 0-600 in-lb (Item 17, Appendix D)

Vise jaw caps (Item 54, Appendix D)

SUPPLIES: Cleaning compound (Item 24, Appendix B)

Grease (Item 9, Appendix B)

Lockwasher (Item 96, Appendix E)

Sealing compound (Item 19, Appendix B)

Wiping rag (Item 14, Appendix B)

EQUIPMENT CONDITION: Starter motor tested (page 9-43)

REMOVAL:

1. DISCONNECT GROUND JUMPER WIRE (1),

JUMPER (2), AND SWITCH (3).

a. Remove nut (4), lockwasher (5), and wire (1)

from terminal 4(6).

b. Remove two nuts (7) from terminal 3 (8) and

ring assembly

stud (9).

c. Remove two screws (10) from mounting

bracket (11).

d. Remove jumper (2) from terminal (8) and

stud(9).

2. REMOVE PLUG (12) FROM SOLENOID CAP

(13).

Goon to Sheet 2

9-48 Change 2