 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM9-2835-255-34
ACCESSORY GEARBOX CLEANING AND REPAIR (Sheet 34 of 40)
WARNING
16. COAT SPUR GEARSHAFT NO. 8 (1) WITH
CLEAN LUBRICATING OIL AND INSTALL, WITH
RIVET HEADS UP INTO HOUSING (2).
17. COAT SPUR GEARSHAFT NO. 7 (3) WITH
CLEAN LUBRICATING OIL AND INSTALL, WITH
RIVET HEADS UP INTO HOUSING (2).
18. COAT SPUR GEARSHAFT NO. 5 AND 6 (4)
WITH CLEAN LUBRICATING OIL AND INSTALL,
WITH RIVET HEADS DOWN, INTO HOUSING (2).
WARNING
Gears are sharp and fingers can get
wedged between them. Use gear train
handle to rotate gears.
19. ROTATE GEARS TO CHECK THAT THERE IS
NO BINDING AND TO MAKE SURE GEARS ARE
MESHING PROPERLY IF NOT, DISASSEMBLE AND
CHECK PARTS.
20. SLOWLY POUR ONE QUART OF CLEAN LUBRI-
CATING OIL OVER ALL INSTALLED BEARINGS AND
GEARS.
21. INSTALL GASKET (5) AND NEW PACKING, (6)
ON HOUSING (2).
Coat both sides of gasket (5) with shortening
a.
compound. Install gasket (5) on mating sur-
face (7) of housing (2).
Coat new packing (6) with shortening com-
b.
pound. Install new packing (6) in groove (8)
of housing (2).
Go on to Sheet 35
7-79
Change 6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals