 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2835-255-34
ACCESSORY GEARBOX CLEANING AND REPAIR (Sheet 33 of 40)
11. INSTALL SPACER (1), WITH SMALLER
DIAMETER DOWN, IN BORE (2) OF HOUSING (3).
WARNING
12. LUBRICATE ALL BEARING BORES (4) IN
HOUSING (3) WITH CLEAN LUBRICATING OIL.
CAUTION
Gear assemblies may be slippery and are
heavy. Use both hands when handling
gear assemblies. Do not lift assemblies
by bearings. Damage to assemblies may
result.
13. COAT SPUR GEARSHAFT ASSEMBLY (5).
SPUR GEARSHAFT NO. 4 (6) AND SPUR GEAR-
SHAFT NO. 9 (7) WITH CLEAN LUBRICATING OIL
AND INSTALL IN HOUSING (3).
a.
Coat spur gearshaft assembly (5), spur gear-
shaft No. 4 (6) and spur gearshaft No. 9 (7)
with clean lubricating oil.
b.
Install spur gearshaft assembly (5), pin end
down, and gearshafts (6 and 7) with heads of
rivets (8) down, into housing (3) as a unit (at
the same time).
14. COAT GEARCLUSTER (9) WITH CLEAN LUBRI-
CATING OIL AND INSTALL, WITH RIVET HEADS
DOWN, INTO HOUSING (3).
15. COAT SPUR GEARSHAFT NO. 10 AND 11 (10)
WITH CLEAN LUBRICATING OIL AND INSTALL,
WITH RIVET HEADS DOWN, INTO HOUSING (3).
Go on to Sheet 34
7-78
Change 6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals