 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2835-255-34
ACCESSORY GEARBOX REPLACEMENT (Sheet 2 of 3)
REMOVE GEARSHAFT (1) AND
PREFORMED PACKING (2).
5. INSPECT PARTS FOR DAMAGE. REPLACE
AS REQUIRED.
INSTALLATION:
NOTE
If gearbox (3) is new, do steps 1 and 2.
1,
REMOVE ACCESSORY GEARBOX FROM
SHIPPING CONTAINER (PAGE 7-18).
INSTALL DEFECTIVE ACCESSORY
2,
GEARBOX IN SHIPPING CONTAINER
APPLY OIL TO SPLINES (4) OF
3.
GEARSHAFT (1) AND NEW PACKING (2).
INSTALL GEARSHAFT (1) AND PACKING
(2) IN DRIVE SPLINES (5) OF GEARBOX
(3).
4.
APPLY SHORTENING TO FOUR NEW
PACKINGS (6, 7, 8).
5.
INSTALL THREE PACKINGS (6, 7) IN
GEARBOX (3) AND PACKING (8) ON
BOTTOM OF PUMP (9).
ALINE PUMP (9) TO GEARBOX (3).
6.
7,
APPLY OIL TO THREADS AND FACE OF
SCREW (10). INSTALL SCREW (10) AND
WASHER (11). TORQUE SCREW (10)
BETWEEN 70-95 LB-IN (8-11 N-m)
8.
APPLY OIL TO THREADS AND FACES OF
THREE SCREWS (12). INSTALL SCREWS
(12) AND WASHERS (13). TORQUE
SCREWS (12) BETWEEN 20-27 LB-FT
(27-36 N"m).
Go on to Sheet 3
7-22
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals