FRONT ANGLE MOUNTING BRACKET REPLACEMENT (Sheet 1 of 1 )

TM 9-2835-255-34

FRONT ANGLE MOUNTING BRACKET REPLACEMENT (Sheet 1 of 1 )

TOOLS: General mechanic's tool kit: automotive (SC 5180-90-CL-N26)

Gearbox dowel pin mechanical puller (Item 41, Appendix D)

Ratchet handle, 3/8-inch drive (Item 9, Appendix D)

Socket, 3/8-inch drive, 7/16-inch (Item 28, Appendix D)

Torque wrench, 0-150 in-lb (Item 27, Appendix D)

SUPPLIES: Lockwasher (Item 58, Appendix E)

Lubricating oil (Item 11 or 12, Appendix B )

EQUIPMENT CONDITION; Gearbox module removed from engine (page 7-7)

REMOVAL:

1. REMOVE PIN (1) AND BRACKET (2).

a. Remove bolt (3), nut (4), lockwasher (5),

and washer (6).

b. Remove pin (1) and bracket (2). Use

puller (7).

2. INSPECT PARTS FOR DAMAGE. REPLACE

AS REQUIRED.

INSTALLATION:

1. INSTALL BRACKET (2) AND PIN (l).

a. Apply oil to bolt (3). Position bracket (2)

in slot (8) and install bolt (3) and washer

(6) through hole (9).

b, Install new lockwasher (5) and nut (4).

2. TORQUE NUT (4) BETWEEN 70-95 LB-IN

(8-11 Nom).

3. INSTALL GEARBOX MODULE ON

End of Task

7-20