|
|
![]() TM 9-2835-255-34
ACCESSORY SEAL ASSEMBLY REPLACEMENT (Sheet 5 of 7)
3. REMOVE PUSHER (1) FROM PULLER (2) AND
REMOVE SEAL (3) NUT (4) AND WASHER (5)
FROM STUD (6).
Move swing washer (7) away. Take puller (2)
a.
and seal (3) out of pusher (1).
Remove four screws (8). Remove and discard
b.
seal (3) and preformed packing (9).
Install screws (8) in storage holes (10). Wipe
C.
gearshft and seal mating surface clean.
INSTALLATION:
1. APPLY SHORTENING COMPOUND ON NEW
PREFORMED PACKING (11) AND INSTALL IN
GROOVE OF NEW RETAINER (12). INSTALL RE-
TAINER ALL THE WAY DOWN ON SHAFT (13).
2. APPLY SHORTENING COMPOUND ON NEW
PREFORMED PACKING (14) AND INSTALL IN
GROOVE (15) OF NEW SEAL.
Go on to Sheet 6
7-2.3
Change 6
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |