USING HOIST AND LIFTING SLING - TM-9-2835-255-340589

TM 9-2835-255-34

GAS TURBINE POWER UNIT REPLACEMENT (Sheet 15 of 30)

CAUTION

Use caution to prevent damage to turbine

rotor (5), mechanical guard (6) or regener-

ator assembly (1). Use extreme care not to

damage inside of regenerator assembly

(1) while installing gas turbine power unit

(2). Avoid excessive upward or downward

movement of power unit (2) to prevent

damage to inside of regenerator assembly

(1). If damage occurs, replace regenerator

with a serviceable assembly.

3. USING HOIST AND LIFTING SLING (3), GUIDE

GAS TURBINE POWER UNIT (2) INTO POSITION IN

REGENERATOR ASSEMBLY (1).

Carefully install gas turbine power unit (2) into

regenerator assembly (1) by applying only

enough downward pressure on lifting sling

handle (4), in combination with hoist, to posi-

tion and guide power unit (2) into regenerator

assembly (1).

Align gas turbine power unit rear assembly 15

slots (7) with 15 spring pins (8) on mounting

flange (9).

Go on to Sheet 16

6-76

Change 6