Place bearing and coupling package

TM 9-2835-255-34

NO. 12 BEARING AND SPLINED COUPLING REPLACEMENT (Sheet 4 of 7)

WARNING

Use caution when using press. Improper

tools or tools not properly aligned may

cause injury to personnel or damage to

parts or equipment.

NOTE

If inner race of No. 12 bearing comes

apart during removal or installation, No. 12

bearing shall be replaced.

4. REMOVE NUT (1) AND LOCKING CUP (2). RE-

MOVE NO. 12 BEARING (3) FROM SPLINED COU-

PLING (4).

Place bearing and coupling package (5) in

holding fixture (6).

Uncrimp locking cup (2). Using wrench (7),

remove nut (1) and locking cup (2).

Remove bearing and coupling package (5)

from holding fixture (6).

Using removal and installation tool (8) arbor

press aid (9) and an arbor press, press No. 12

bearing (3) from splined coupling (4).

5. INSPECT PARTS FOR DAMAGE. REPLACE AS

REQUIRED.

LE5524

Go on to Sheet 5

5-127

Change 8