INSTALL NEW PLAIN ENCASED SEAL

TM 9-2835-255-34

NO. 2 AND 3 BEARING SEAL/PACKING RETAINER REPLACEMENT (INCLUDING INTERSHAFT SEAL)

(Sheet 35 of 49)

14. INSTALL NEW PLAIN ENCASED SEAL (1) INTO

NO. 2 BEARING SEAL HOUSING (2) USING SLEEVE

(3) AND ARBOR PRESS.

Make sure all screws in plain encased seal

(1) are covered when retaining ring (4) is

installed.

15. INSTALL RETAINING RING (4) INTO GROOVE OF

NO. 2 BEARING SEAL HOUSING (2) TO SECURE

PLAIN ENCASED SEAL (1).

16. INSTALL NEW PREFORMED PACKING (5) ONTO

NO. 2 BEARING SEAL HOUSING (2).

Lubricate new preformed packing (5) with

shortening compound and install into

groove (6) of No. 2 bearing seal housing (2).

LE5581

Go on to Sheet 36

Change 6

5-109