INSTALL RING SPACER - TM-9-2835-255-340475

TM 9-2835-255-34

NO. 2 AND 3 BEARING SEAL/PACKING RETAINER REPLACEMENT (INCLUDING INTERSHAFT SEAL)

(Sheet 29 of 49)

2. INSTALL RING SPACER (1) IN NO. 3 BEARING

HOUSING (2).

Align slot (3) of ring spacer (1) with spring pin

(4) in No. 3 bearing housing (2).

NOTE

Tang (5) of ring spacer (1) should be

aligned with slot (6) in bearing (7) outer

race.

Install ring spacer (1) into No. 3 bearing Hous-

ing (2).

Use caution when using press. Improper

tools, or tools not properly aligned may

cause injury to personnel or damage to

parts or equipment.

3. USING PUSHER TOOL (8) AND ARBOR PRESS,

EXPLODED

INSTALL RING SPACER (9) AND PACKING RETAIN-

FOR CLARITY

ER (10) INTO NO. 3 BEARING HOUSING (2).

Lightly lubricate large diameter side of ring

spacer (9) with lubricating oil. Place ring

spacer (9) into No. 3 bearing housing (2) with

large diameter side up.

Lightly lubricate face seal of packing retainer

(10) with lubricating oil. Install packing retainer

(10) into No. 3 bearing housing (2) with car-

bon element facing down.

Using seal installer tool (8) and arbor press,

press ring spacer (9) and packing retainer (10)

into No. 3 bearing housing (2).

Go on to Sheet 30

5-103

Change 6