INSTALL LOCKING CUP HOLDING FIXTURE

TM 9-2835-255-34

NO. 2 AND 3 BEARING SEAL/PACKING RETAINER REPLACEMENT (INCLUDING INTERSHAFT SEAL)

(Sheet 8 of 49)

Remove jacking screws (1), bearing housing

(2) and ring spacer (3) from inlet housing (4).

Retain ring spacer (3) for further use.

Remove and discard two preformed packings

(5) from bearing housing (2).

4. INSTALL LOCKING CUP HOLDING FIXTURE (6)

ON INLET HOUSING (4).

NOTE

Locking cup holding fixture (6) has an

"offset hole" which will be at 7 o'clock

position when properly installed on inlet

housing (4).

Place locking cup holding fixture (6) onto inlet

housing (4) and ensure tangs of holding fix-

ture (6) engage packing retainer (7).

Secure fixture (6) to inlet housing (4) with six

bolts (8) removed in step 3.a.

LE5552

Go on to Sheet 7

5-80

Change 6