APPLY SHORTENING COMPOUND TO NEW PREFORMED PACKING

TM 9-2835-255-34

NO. 1 BEARING SEAL/PACKING RETAINER REPLACEMENT (Sheet 16 of 21)

CAUTION

Larger preformed packing (1) must be

installed in groove (2) of sleeve bushing

(3). Smaller preformed packings (4) must

be installed in grooves (5) of bearing

housing (6). Installing wrong packings in

grooves will result in oil leakage at inlet

housing (7).

9. APPLY SHORTENING COMPOUND TO NEW

PREFORMED PACKING (1) AND INSTALL IN

GROOVE (2) OF SLEEVE BUSHING (3).

10. APPLY SHORTENING COMPOUND TO TWO

NEW PREFORMED PACKINGS (4) AND INSTALL

INTO GROOVES (5) OF BEARING HOUSING (6).

11. APPLY SHORTENING COMPOUND TO NEW

PREFORMED PACKING (8) AND INSTALL ONTO

FORWARD FACE OF INLET HOUSING (7).

Go on to Sheet 17

Change 6

5-69