NO. 1 BEARING SEAL/PACKING RETAINER REPLACEMENT (Sheet 1 of 21)

TM 9-2835-255-34

NO. 1 BEARING SEAL/PACKING RETAINER REPLACEMENT (Sheet 1 of 21)

TOOLS:

General mechanic's tool kit: automotive (SC5180-90-N26)

Adapter, socket wrench, 3/4 inch male, 1/2 inch female (Item 120, Appendix D)

Arbor press (Item 37, Appendix D)

Holding fixture (Item 146, Appendix D)

Industrial goggles (Item 58, Appendix D)

Installer tool (Item 147, Appendix D)

Micrometer, 1 inch (Item 128, Appendix D)

Micrometer, depth gage (Item 205, Appendix D)

Puller (Item 148, Appendix D)

Socket, 3/8-inch drive, 1/4-inch, 12 point (Item 190, Appendix D)

Socket, 3/8-inch drive, 7/32-inch, 12 point (Item 191, Appendix D)

Spanner wrench (Item 119, Appendix D)

Tool kit (Item 149, Appendix D)

Torque wrench, 0-600 in-lb (Item 17, Appendix D)

Torque wrench, 0-250 ft-lb (Item 151, Appendix D)

PERSONNEL: Two

SUPPLIES:

Antiseize compound (Item 2, Appendix B)

Cotton gloves (Item 52, Appendix B)

Dry cleaning solvent (Item 7, Appendix B)

Dry molycote (lubricant, solid film) type "z" (Item 53, Appendix B)

Marker (Item 25, Appendix B)

Non-electric safety wire (Item 15, Appendix B)

Nut (Item 198, Appendix E) (3 required)

Packing retainer (face seal) (Item 161, Appendix E)

Packing retainer (locking cup) (Item 162, Appendix E)

Preformed packing (Item 163, Appendix E) (2 required)

Preformed packing (Item 164, Appendix E)

Preformed packing (Item 165, Appendix E)

Preformed packing (Item 166, Appendix E)

Preformed packing (Item 129, Appendix E)

Protector caps (Item 167, Appendix E)

Ring spacer (shim) (Item 168, Appendix E)

Self-locking nuts (Item 8, Appendix E) (4 required)

Shortening compound (Item 20, Appendix B)

Slave bolts (Item 196, Appendix E) (3 required)

Sleeve, flared (Item 169, Appendix E)

Sleeve, compression (Item 170, Appendix E)

Spacer ring (Item 171, Appendix E)

Washer (Item 197, Appendix E) (3 required)

Wiping rag (Item 14, Appendix B)

Go on to Sheet 2

Change 6

5-55