INSPECT GASKET - TM-9-2835-255-340418

TM 9-2835-255-34

LOW PRESSURE ROTOR AND HOUSING ASSEMBLY (COMPRESSOR) AND HIGH PRESSURE

AXIAL COMPRESSOR AND ROTOR CLEANING (Sheet 14 of 21)

INSPECT GASKET (1) FOR DAMAGE

25.

THAT MIGHT CAUSE AN AIR LEAK. CUT

AND REMOVE LOWER HALF OF GASKET

(1) IF DAMAGED.

a. Inspect gasket (1) for gouges, nicks or cuts

that could cause an air leak,

b. If damaged, cut gasket even with split line

flange (2) on both sides of engine, and

remove cut portion of gasket (l). Save

removed portion for use in step 26.

c. Wipe spacer half (3) with rag.

NOTE

Do step 26 only if lower half of gasket (1) was

removed.

26. CUT AND INSTALL NEW GASKET (l).

Using removed portion of gasket (1),

measure and cut a new gasket to the same

length.

Apply shortening compound to new gasket

(1) and install on spacer half(3).

Go on to Sheet 15

Change 4 5-47