Installation. - TM-9-2815-224-34-P0413

TM 9-2815-224-34&P

Engine Governor Maintenance Instructions (Cont)

(3) Remove cotter pin (5) pin (6), and

lever (7) from connecting link (8).

(4) Remove spring pin (9), connecting

link (8) and throttle piston (10).

(5) Remove check valve (11) and

plug (12) from cylinder (4).

b. Installation.

(I) Install plug (1) and check valve (2) in

cylinder (3).

(2) Install connecting link (4) and spring

pin (5) to throttle piston (6).

(3) Install lever (7), pin (8), and cotter

pin (9) to connecting link (4).

(4) Install throttle piston (6) in

cylinder (3).

(5) Install cylinder (3) in cylinder head (10).

(6) Install U-bolt (11), two nuts (12), and

lockwasher (13).

c. Follow-on Maintenance.

(1) Install right front engine brake retarder and drone (para 11-2).

(2) Adjust injector rack control levers (para 19-6).

(3) Adjust throttle delay (para 19-8).

END OF TASK

15-21