BLOWER ACCESSORY DRIVE HUB REMOVAL/INSTALLATION.

TM 9-2815-224-34&P

Blower and Water Pump Drives Maintenance Instructions (Cont)

10-3. BLOWER ACCESSORY DRIVE HUB REMOVAL/INSTALLATION.

This task covers:

a. Removal

c. Installation

b. Cleaning/Inspection

d. Follow-on Maintenance

INITIAL SETUP

Models

References

All

None

Test Equipment

Equipment Condition

None

TM or Para

Condition Description

Special Tools

TM 9-2320-279-20 Engine cover removed.

Tool, blower drive shaft alinement J24619 or

TM 9-2320-279-20 Air compressor removed.

J33001

Special Environmental Conditions

Supplies

None

Solvent, dry cleaning, Item 60, Appendix C

General Safety Instructions

Personnel Required

None

MOS 63W, Wheel vehicle repairer

Level of Maintenance

Direct Support

a. Removal.

(1) Remove nut (1), copper washer (2), and screw (3).

(2) Remove three screws (4) and lockwashers (5).

(3) Remove two screws (6), lockwashers (5), cover (7), and gasket (8).