Removal. - TM-9-2815-224-34-P0190

TM 9-2815-224-34&P

Valve Mechanism Maintenance Instructions (Cont)

7-6. CAM FOLLOWER/PUSH ROD REMOVAL/lNSTALLATlON (CONT).

a. Removal.

NOTE

Tag cam follower and associated parts so they may be installed in original

location.

This procedure shows removal of one cam follower. Remove other cam

followers in same way.

Set cylinder head (1) on side on 1 in. (25 mm) wooden blocks

(1)

Remove two screws (2) and lockwashers (3) from camfollower guide (4).

(2)

Remove cam follower guide (4) from cylinder head (1).

(3)

Remove cam follower (5) and push rod assembly (6),as a unit, from cylinder head (1).

(4)

Remove cam follower (5) from push rod assembly (6).

(5)

(6) Remove locknut (7), spring (8), and lower spring seat (9), and push rod (10).