CLEANING -- REAR BEARING PLATE

CYLINDER BLOCK REPAIR (CONTINUED)

Inspect crankcase oil tube (8) for leaks or damage. If defec-

tive, do not attempt to replace tube or repair

block.

CLEANING -- REAR BEARING PLATE

WARNING

-0

Dry-cleaning solvent used to clean parts is poten-

tially dangerous to personnel and property. Do

not use near open flame or excessive heat. Flash

point of solvent is 138 "F.

NOTE

Clean rear bearing plate with dry-cleaning solvent (item 8,

Appx or mineral spirits paint thinner (item 21, Appx C).

Do not install oil bypass valve until rear bearing

plate has been cleaned and inspected.

Flush oil bypass port (p 3-131) using clean fuel. Use cleaning

wire to open oil port if necessary.

and inspect rear bearing plate (2).

Wipe dry with clean, lint-free cloth (item 6, Appx C).

1243