OIL BYPASS VALVE REPAIR

DISASSEMBLY

NOTE

The oil bypass valve is located in the rear bearing

plate.

A Remove

and

B Remove oil bypass

CLEANING

WARNING

Particles blown by compressed air can be

WARNING

dangerous. Direct air stream away from all per-

Dry-cleaning solvent used to clean parts is poten-

sonnel in immediate area.

tially dangerous

personnel and property. Do

C Air dry oil port with clean, filtered,

compressed air.

not use near open flame or excessive heat. Flash

point of solvent is 138 `F.

D Soak parts in clean container containing rust preventive

A Clean plug (l),

and valve (3) with dry-cleaning sol-

vent (item 8, Appx C) or mineral spirits paint thinner (item

E Wipe dry with clean, lint-free cloth (item 6, Appx C). Air dry

21,

as in step C.

B Wipe dry with clean, lint-free cloth (item 6, Appx C).

Coat parts with oil (item 16, Appx C).

1239