 |
|||
|
|
|||
|
Page Title:
INSTALLATION OF FUEL INJECTOR NOZZLE AND HOLDER ASSEMBLIES, FUEL RETURN TUBES, AND FUEL INJECTION TUBES |
|
||
| ||||||||||
|
|
 (2) Figure 504. (A) Position crankcase
breather adapter, with attached hose,
on front and rear cylinder head covers
as shown. (B) Secure adapter to cylinder
head covers using four 5/16- inch lock
washers and 5/16- inch plain nuts.
PUMP DRIVEN GEAR ACCESS COVER.
c. Install Front Cylinder Head and Crank-
case Breather Adapter. Install front cylinder
head and crankcase breather adapter as follows.
BREATHER ADAPTER.
cylinder head cover gasket and cover
on front cylinder head and aline screw
284. INSTALLATION OF FUEL INJECTOR
holes. (B) Install seven 5/16- inch lock
NOZZLE AND HOLDER ASSEMBLIES,
washers and 5/16 x 7/8 cap screws to
FUEL RETURN TUBES, AND FUEL
temporarily hold cylinder head cover
INJECTION TUBES
to cylinder head. Install one 5/16-inch
plain washer and 5/16- inch self-locking
a. Install Fuel Injector Nozzle and Holder
nut. (C) Install oil filler cap. (D) Posi-
Assemblies. Figure 505. (A) Remove protective
tion a new crankcase breather adapter
plugs from fuel injector nozzle and holder
gasket on each cylinder head cover.
openings. (B) Install nozzle hold- down clamp
NOZZLE AND HOLDER ASSEMBLY.
HEAD COVER.
319
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals