|
|
![]() gines, remove one 5/16-inch self-lock-
(2) Figure 264. (A) Remove and discard
crankcase breather adapter gaskets
ing nut and plain washer in lieu of 5/16-
f r o m front and rear cylinder head
inch plain nut and 5/16-inch plain
covers. (B) Remove oil filler cap. (C)
washer. (E) Remove front cylinder head
Remove seven 5/16 x 7/8 cap screws
ccver, tachometer cable bracket, and
and 5/16-inch lock washers securing
cover gasket. Discard gasket. (F) Re-
front cylinder head cover and tacho-
move the rear cylinder head cover in the
meter cable bracket to front cylinder
same manner by repeating steps C, D,
head assembly. (D) On late model en-
and E above.
OUTLET, INTAKE, AND EXHAUST
MANIFOLDS
a. General. The water outlet manifolds con-
nect to the two cylinder heads and provide a
passage for the coolant back to the radiator
through the thermostat housing. Intake and
e x h a u s t manifolds are atached to the left
side of the cylinder heads.
b. Removal. Remove water outlet manifolds,
lows.
(1) Figure 265. (A) Loosen two 1-5/8-inch
id hose clamps securing front and rear
cylinder head water outlet manifold-to-
intake manifold hoses. (B) Remove six
5/16 x 2-1/4 cap screws and 5/16-inch
lock washers securing front cylinder
head water outlet manifold to front
REAR CYLINDER HEAD COVERS.
HEAD WATER OUTLET MANIFOLDS.
166
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |