 |
|||
|
|
|||
|
Page Title:
REMOVAL OF OIL GAGE ROD SUPPORT AND GENERATOR MOUNTING BRACKET |
|
||
| ||||||||||
|
|
 (2) Figure 250. (A) Remove three 3/8 x
AND GENERATOR MOUNTING BRACK-
ET
a. General. The oil gage rod support screws
into a tapped hole in the crankcase and is sup-
ported at the top by a bracket. The generator
mounting bracket is installed at the lower left
front corner of the engine.
b. Removal. Figure 251. (A) Remove oil gage
rod support. (B) Remove three 7/16 x 1-1/2 cap
screws and 7/16-inch lock washers securing
Remove generator mounting bracket.
OIL INLET TUBE AND OIL PRESSURE
REGULATOR VALVE HOUSING ASSEM-
BLY
a . General. The turbosupercharger oil inlet
tube is connected to an elbow in the crankcase.
The oil pressure regulator valve housing as-
sembly is mounted near the center of the left
side of the engine.
CHARGER OIL INLET TUBE, FITTINGS,
AND OIL PRESSURE REGULATOR
VALVE HOUSING ATTACHING PARTS
(LATE MODEL ENGINES).
160
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals