 |
|||
|
|
|||
|
Page Title:
REMOVAL OF FLAME HEATER FUEL PUMP AND FUEL FILTER BRACKET |
|
||
| ||||||||||
|
|
 124. REMOVAL OF FLAME HEATER FUEL
(3) Figure 247. (A) Remove two 5/16-inch
PUMP AND FUEL FILTER BRACKET
plain nuts and 5/16-inch lock washers
securing the intake manifold elbow to
A. General. The flame heater fuel pump,
the intake manifold. (B) Remove intake
solenoid valves, and fuel filter are supported
manifold elbow with the turbosuper-
by a bracket mounted on the lower left side of
charger-to-intake manifold hose and
the engine. The bracket is secured with three
clamps attached.
oil pan mounting capscrews.
(4) Figure 248. (A) Remove and discard
b . Removal. Remove the flame heater fuel
intake manifold elbow gasket. (B) Un-
pump and fuel filter bracket as follows.
screw and withdraw oil level gage.
(C) Remove No. 12 plain nut, No. 12
(1) Figure 249. (A) Disconnect 1/4-inch
lock washer, and No. 12 x 5/8 machine
tube nut on fuel pump-to-fuel inlet
screw securing oil level gage rod sup-
solenoid valve tube from 90 degree
p o r t to oil level gage rod support
elbow in solenoid valve and remove
bracket. Disconnect flame heater har-
tube. (B) Disconnect 1/4-inch tube nut
ness from clamp.
on fuel return-to-fuel solenoid valve
tube from 90 degree elbow in solenoid
valve and remove tube. (C) Remove
No. 10 plain nut, No. 10 lock washer,
No. 10 x 3/8 machine screw, and cush-
ioned clamp holding fuel tubes together
and remove tubes. (D) Disconnect 1/4-
inch tube nut on fuel filter-to-fuel inlet
solenoid valve from 90 degree elbow in
solenoid valve. (E) Disconnect fuel
filter-to-fuel inlet solenoid valve tube
from 1/4 tube x 1/8 pipe union in filter
outlet port and remove tube. (F) Re-
move No. 10 plain nut, No. 10 lock
washer, and No. 10 x 1-3/4 machine
screw securing flame heater harness
ground wire. Disconnect ground wire.
(G) Disconnect flame heater harness
from solenoid valves. Remove flame
heater harness.
FIGURE 248. DISCONNECTING OR CONNECT-
FIGURE 249. DISCONNECTING OR CONNECT-
ING FLAME HEATER HARNESS AT OIL
ING FLAME HEATER FUEL TUBES AND
LEVEL GAGE SUPPORT BRACKET.
HARNESS AT SOLENOID VALVES.
159
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals