 |
|||
|
|
|||
|
Page Title:
REMOVAL OF AIR COMPRESSOR SUPPORT AND FUEL INJECTION PUMP ADAPTER ASSEMBLIES |
|
||
| ||||||||||
|
|
 (5) Figure 239. (A) Remove and discard oil
cooler and oil filter housing gasket.
PORT AND FUEL INJECTION PUMP
( B ) Remove eleven 3/8 x 7/8 cap
ADAPTER ASSEMBLIES
screws and 3/8-inch lock washers se-
curing tappet chamber cover to cyl-
inder and crankcase. (C) Remove tappet
a . General. A support for mounting the air
chamber cover.
compressor is provided at the upper left front
of the engine. The fuel injection pump adapter
assembly is mounted at the left rear of the
engine front plate.
b. Removal. Remove air compressor support
and fuel injection pump adapter assemblies as
follows.
(1.) Figure 241. (A) Remove seven 3/8 x
7 / 8 cap screws and 3/8-inch lock
washers securing air compressor sup-
port assembly to cylinder and crank-
case. (B) Remove air compressor sup-
port assembly.
(6) Figure 240. (A) Remove and discard
tappet chamber cover gasket. (B) Re-
move cylinder and crankcase water
baffle.
CYLINDER AND CRANKCASE
WATER BAFFLE.
156
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals