 |
|||
|
|
|||
|
Page Title:
FIGURE 134. REMOVING OR INSTALLING OIL COOLER COVER. |
|
||
| ||||||||||
|
|
 (3) Figure 133. (A) Remove two 1/4- inch
self- locking nuts, 1/4- inch flat washers,
and 1/4 x 1-3/8 cap screws securing in-
jection tube outer clamp to inner clamp.
Remove outer clamp. (B) Remove 3/8-
inch plain nut, 3/8- inch lock washer
and flat washer, securing fuel injection
tube inner clamp to oil cooler and oil
filter housing stud. (C) Disconnect cyl-
inder No. 4, 5, and 6 fuel injection tubes
from fuel injector nozzle and holder as-
semblies and at fuel injEction pump hy-
draulic head. Remove tubes.
Note. Plug or cap tubes and injection
tube openings in the nozzle holders and
injection pump hydraulic head to pre-
vent entrance of dirt.
(4) Figure 134. (A) Remove twelve 1/4-
CYLINDER NO. 4, 5, AND 6 FUEL
inch plain nuts and 1/4-inch lock
INJECTION TUBES.
washers securing oil cooler cover to
oil cooler and oil filter housing. (B) Re-
move oil cooler cover.
OIL COOLER COVER GASKET AND
OIL COOLER COVER.
OIL COOLER.
101
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals