 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 69. OIL COOLER BYPASS VALVE
Note. Components of the oil cooler bypass
valve are the same as the oil filter bypass valve
(fig. 99).
a. Removal and Inspection. Figure 100. (A)
Remove oil cooler bypass valve plug and plain
washer from oil cooler and filter housing. Dis-
card plain washer. (B) Remove oil cooler bypass
spring and plunger from machined bore in oil
cooler and filter housing. (C) Inspect oil cooler
bypass valve plunger bore in housing for burs,
scratches, wear, or obstructions. Clean bore
thoroughly using dry- cleaning solvent or mineral
spirits pain thinner. Remove slight burs and
scratches in bore with crocus cloth.
b. Repair. Repair of the oil cooler bypass
AND INSPECTING OIL FILTER
valve components is limited to replacement of
BYPASS VALVE.
parts.
c. Installation. Refer to figure 100 and re-
c. Installation. Refer to figure 99 and re-
verse the sequence of instructions and install
ver-se the sequence of instructions to install
the oil cooler bypass valve components. Use a
oil filter bypass valve components. Use a new
new plain washer when installing oil cooler
plain washer when installing plug.
bypass valve plug.
AND INSPECTING OIL COOLER
AND INSPECTING OIL PRESSURE
BYPASS VALVE.
REGULATOR VALVE.
87
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals