Overhaul of Intake Manifolds Flame Heater Assembly

intake manifold is mentioned only where there is

Overhaul of Intake Manifolds

and

difference in disassembly procedures.

Flame Heater Assembly

b. Disassembly. Disassemble intake manifolds

a. General. The right and left intake manifolds

and flame heater following instructions which

are similar and are disassembled in the same

accompany

through

6-235.

manner. For instructional purposes the right

intake manifold will be disassembled. The left

Install

Remove

1. position a new heater gasket (C) on heater tube.

1. Remove

four self-locking nuts (A) an flat washers

2. Position tight manifold heater (B) and fittings on

attaching

manifold heater assembly to heater tube.

tube.

2. Remove

right mainfold heater (B) and fittings.

3. Install four self-locking nuts (A) and flat washers

3. Remove

and discard heater gasket (C).

securing manifold heater assembly to tube.

6-228.

Removing

installing

manifold

heater

assembly.

6-194