Overhaul of engine and Transmission Oil Cooler and Associated Parts

Table 6-37. Engine and Transmission Oil Coolers and Engine Cooling Fan

Assembly

Disassembly

Inspection

Cleaning

Repair

Component

E n g i n e and

Transmis-

through

sion Oil

through

Coolers

6-221

6-223

Engine

Cooling

Fan

6-47.

Overhaul

Engine

and

Trans-

mission

Oil

Cooler

and

Associ-

ated

Parts

a. General. The engine oil coolers are identical

and so are the transmission oil coolers. Adap-

tation to either right or left installation is ac-

complished by the addition of hose connections,

elbows, and bypass valves. For instructional

purposes, the engine and transmission oil coolers

adapted for right bank installation will be

disassembled.

Disassembly. Disassemble

engine

and

transmission oil coolers following instructions

which accompany figures 221 through 223.

Remove

1. Remove transmission oil cooler bypass valve (A).

Remove and discard valve gasket.

2. Remove two assembled washer bolts (B) and remove

oil cooler shroud plate.

Install

1. Position oil cooler shroud plate on transmission oil

cooler and install two assembled washer bolts (B).

2. Position a new valve gasket on cooler and install

transmission oil cooler bypass valve (A).

Figure 6-221. Removing or installing

transmission

oil

cooler

bypass

valve

and

shroud

plate.

6-185