Figure 6-102. Removing or installing main and auxiliary oil filters.

Remove

1. Remove the main oil filter stop bolt, sealing washer,

and main oil filter assembly (A).

2. Remove the auxiliary oil filter stop bolt, sealing

Remove

washer, and auxiliary oil filter assembly (B).

3. Remove and discard oil filter gaskets (C).

W a r n i n g : The oil pressure regulator cover is

4. Remove eight self-locking nuts (D) and remove two

spring loaded. Exercise care when removing

lifting eyes. Remove and discard lifting eye gasket.

cover.

Install

1. Remove two self-locking nuts (A) and flat washers

N o t e . The lifting eye gasket is used under the

attaching oil pressure regulator valve cover. Remove

l e f t lifting eye only.

and discard gasket.

2. Remove oil pressure regulator valve assembly parts in

1. Position lifting eye gasket on left side of damper and

oil filter housing. Position one lifting eye on each side of

the sequence shown in figure 6-104. Note number of

housing and install four self-locking nuts (D) securing

f l a t washers (A) removed for reference during

each lifting eye.

assembly.

Install

2. Position a new oil filter gasket (C) on main and

1. Install oil pressure regulator valve assembly parts in

auxiliary oil filter openings in housing.

3. Position the auxiliary oil filter assembly (B), sealing

the sequence shown in figure 6-104. Install the same

washer, and auxiliary oil filter stop bolt in housing.

number of flat washers (A) as removed.

4. Position the main oil filter assembly (A), sealing

2. Position a new valve cover gasket on housing. Position

washer, and main oil filter stop bolt in housing.

valve cover on housing and install two self-locking nuts

(A) and flat washers securing cover on housing.

Figure 6-102. Removing or installing main

Figure 6-103. Removing or installing oil

and auxiliary oil filters.

pressure regulator valve cover

and gasket.

6-100