 |
|||
|
|
|||
|
Page Title:
Table 6-5. Generator Drive Overhaul Standards |
|
||
| ||||||||||
|
|
 b. Cleaning, Inspection, and Repair. Refer to
paragraphs 6-2 through 6-4.
(1) Inspect generator drive gearshaft, oil
seal, and bearings against limits specified in the
overhaul standards (table 6-5). Replace parts
not meeting these requirements.
(2) Refer to paragraphs 6-3c and 6-3e for
inspection of generator adapter and studs. Refer
to paragraph 6-4e and table 6-6 when replacing
adapter
studs.
1. Remove generator adapter oil seal from the adapter
using a suitable arbor press.
Note. It is not necessary to remove generator
drive gearshaft ball bearings unless inspection
(para 6-3d) indicates replacement is needed.
2 . Press generator drive gearshaft from upper ball
bearings (A).
3. Press the gearshaft from lower ball bearing (B) in the
same manner.
shaft from ball bearings.
Table 6-5. Generator Drive Overhaul Standards
Note.
Refer
to
6-3b
for
explanation
of
symbols.
6-29
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals