Figure 5-115. Disconnecting or connecting right camshaft gear housing at cylinder 6R.

1. Install mechanical puller (A) into threaded end of

camshaft drive shaft.

2. Remove camshaft drive shaft (B).

Remove

Figure 5-114. Removing camshaft drive shaft

1. Remove and discard camshaft gear housing cover

using mechanical puller-5120-678-5282.

gasket (A).

2. Remove camshaft drive gearshaft oil transfer plug

retaining ring (B).

Install

1. Install camshaft drive gearshaft oil transfer plug

retaining ring (B).

2. Install a new camshaft gear housing cover gasket (A).

Figure 5-112. Removing or installing

camshaft drive gearshaft oil transfer

plug retaining ring.

1. Install mechanical puller (A) - 5120-678-5282 into

threaded end of camshaft drive gearshaft oil transfer

Disconnect

plug.

1. Loosen two hose clamps (A).

2. Remove oil transfer plug (B).

2. Remove two cap screws (B) and flat washers at-

taching camshaft gear housing to cylinder 6R.

Figure 5-113. Removing camshaft drive

Connect

gearshaft oil transferplug using

1. Install two cap screws (B) and flat washers securing

mechanical puller-5120-678-5282.

camshaft gear housing to cylinder 6R.

2. Tighten two hose clamps (A).

Figure 5-115. Disconnecting or connecting

right camshaft gear housing at cylinder 6R.

5-66