 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
42. REPAIRER AND HELPER TURN
HOUSING (2) OVER AND PLACE
ON TWO WOOD BLOCKS.
43. REMOVE FOUR PADS (1).
41. CHECK FOUR PADS (1).
a. (H) Using l-inch ratchet handle and
1 3/4-inch socket, hold pads (1).
a. Using depth gage measure height
Repairer, remove four screws (3).
of four pads (1).
and washers (4).
b. If any pad measures less than
b. Remove four pads (1) from underside
0.644 inch (16.36 mm), go to step 42.
of housing (2). Discard four pads.
If each pad (1) measures 0.644 inch
c. Go to step 45.
(16.36 mm) or more, go to step 44.
44. REPAIRER AND HELPER, TURN
HOUSING (2) OVER AND PLACE
ON TWO WOOD BLOCKS.
46. REMOVE TWO MACHINE THREAD
45. REMOVE TWO MACHINE THREAD
PLUGS (7).
PLUGS (5).
a. Using 3/8-inch drive ratchet handle
a.
Using 3/8-inch drive ratchet handle
and 1/8-inch socket wrench
and 3/16-inch socket wrench
attachment, remove two plugs (7).
attachment, remove two plugs (5).
b. Remove and discard two preformed
Remove and discard two preformed
b.
packings (8).
packings (6).
GO TO NEXT PAGE
4-245
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals