 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
REPAIR INPUT BEVEL ASSEMBLY
This task covers: Disassemble (page 4-126). Assemble (page 4-133).
Tools:
Materials/Parts:
Dry ice (Item 4, App B)
Arbor press (Item 3, App C)
Sealant compound -- (Item 11, App B)
Bearing installer -- (Item 9, App C)
Bearing nut wrench (Item 15, App C)
Transmission oil (Item 12, App B)
Drag wrench -- (Item 24, App C)
Wood block -- (Item 1, App D)
General mechanic's tool kit:
Wood block (2) (Item 6, App D)
automotive -- (Item 33, App C)
Gasket
Industrial goggles -- (Item 39, App C)
Key washer
Inserted hammer face holder --
Retaining ring
(Item 39A, App C)
Inserted hammer face (Item 39B, App C)
Personnel Required:
Inserted hammer face -- (Item 39C, App C)
Leather gloves -- (Item 42, App C)
Track Veh Rep 63H10
Mechanical puller (Item 48, App C)
Helper (H)
Mechanical puller kit -- (Item 49, App C)
Micrometer caliper set (Item 52, App C)
References:
Retaining-ring pliers -- (Item 59, App C)
Snap-ring guide fixture (Item 73, App C)
TM 9-214
Socket wrench adapter (Item 74, App C)
Telescoping gage set (Item 93, App C)
Equipment Conditions:
Thermal drying oven (Item 94, App C)
Torque wrench -- (Item 99, App C)
Input bevel assembly on workbench.
Torque wrench (Item 100, App C)
See page 4-94.
WARNING
Retaining ring is installed
under high tension. Use care
when removing retaining ring.
Personnel can be injured.
Always wear goggles.
1. USING RETAINING-RING PLIERS,
REMOVE AND DISCARD RETAINING
RING (1).
2. INSPECT SHAFT SEALS (2).
See page 2-5.
If seals (2) are damaged, go to step 3.
a.
If not, go to step 4.
4-126
Change 2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals