 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
106, R E M O V E RETAINER(3) AND
SHIM(S) (4).
a.
Remove six bolts (5).
b.
Using plastic-faced hammer, tap
105. REMOVE CLUTCH HOUSING (1).
spur gearshaft (6) from opposite
side of transmission to loosen
a. Working on right side of transmission,
retainer (3).
remove two screws (2) and clutch
housing (1).
c.
Using pry bar behind shims (4), care-
fully remove retainer (3) and shim(s).
NOTE
Thickness of each shim is marked on face of shim.
107, FIND TOTAL THICKNESS OF ALL
SHIM(S) (4).
108. IF BACKLASH IS GREATER THAN
0.011 inch (0.28 mm), GO TO
STEP 109. IF BACKLASH IS LESS
109. REPLACE SHIM(S) (4) WITH SET THAT
THAN 0.008 INCH (0.20 mm), GO
IS 0.005 INCH (0.13 mm) THICKER.
TO STEP 110.
GO TO STEP 111.
4-116
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals