 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
101. REPLACE SHIM(S) (1) WITH SET THAT
102. REPLACE SHIM(S) (1) WITH SET THAT
IS 0.005 INCH (0.13 mm) THINNER.
IS 0.005 INCH (0.13 mm) THICKER.
GO TO STEP 103.
NOTE
Nicks and burrs must be removed from shim(s)
before use.
103. INSTALL RETAINER (2) AND
SHIM(S) (1).
a. Slide shim(s) (1) onto retainer (2)
and press retainer into housing (3).
b. Aline six bolt holes in retainer (2)
and shim(s) (1) with housing (3).
Using plastic-faced hammer, tap
retainer (2) into place.
c. Install six bolts (4).
1 0 4 . USING l/2-lNCH DRIVE TORQUE
WRENCH, TORQUE SIX BOLTS (4)
TO 25-30 ft-lb (3-4 mkg).
GO TO NEXT PAGE
4-115
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals