 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
35. REMOVE CONE AND ROLLERS (2)
FROM PINION (1).
a. Using mechanical puller kit, remove
cone and rollers (2) from pinion (1).
Discard cone and rollers.
36. INSPECT PINION (1).
34. REMOVE SPIRAL BEVEL PINION (1)
a . Inspect pinion (1) for damage, See
W I T H CONE AND ROLLERS (2) FROM
I
GEARSHAFT (3).
b. If pinion (1) is not damaged, go to
a. Using mechanical puller kit, remove
step 37. If pinion is damaged, replace
pinion (1) with cone and rollers (2)
pinion and cone and rollers (2). Go
from gearshaft (3).
to step 38.
37. CHECK PINION (1)
38. INSPECT ROLLER CUP (4).
a.
Using micrometer caliper set, measure
a. Inspect cup (4) for damage. See
outside diameter of pinion (1).
TM 9-214.
Replace pinion (1) if measurement is
b.
b. If cup (4) is damaged, go to step 39.
less than 3.6265 inches (92.1 113 mm).
If not, go to step 40.
4-100
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals