 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
NOTE
If bevel gear or pinion is damaged, both
gears must be replaced as a matched set.
40. INSPECT BEVEL GEAR (3),
PINION (4), AND SPUR GEAR (5).
Inspect gear (3), pinion (4) and
a.
gear (5) for excessive wear or
damage. See page 2-5.
If gear (3) or pinion (4) is worn or
b.
damaged, go to step 41.
39. REMOVE CUP (1) FROM RETAINER (2)
If gear (5) is worn or damaged, go to
c.
TAGGED AS "LEFT SIDE SET".
step 45.
a. Using arbor press and bearing extrac-
If pinion (4), and gears (3) and (5) are
d.
tor, remove cup (1) from retainer (2).
not damaged, save pinion and gears for
installation. Go to step 43.
b. Replace cup (1).
41. REMOVE PINION (4) WITH CONE AND
ROLLERS (6) FROM GEARSHAFT (7)
IF NOT REMOVED.
a.
Using mechanical puller kit, remove
pinion (4) with cone and rollers (6)
42. INSPECT GEARSHAFT TEETH (8)
from gearshaft (7).
AND SPLINES (9).
b.
Replace pinion (4) and cone and
a. Inspect teeth (8) and splines (9) for
rollers (6).
damage. See page 2-5.
Discard old pinion (4) and cone
c.
b. Replace gearshaft (7) if damaged.
and rollers (6).
GO TO NEXT PAGE
4-101
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals