 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
WARNING
Do not handle hot or cold
parts without protective
gloves. Personnel can be
injured.
CAUTION
Use care when removing bushing from
housing. Damage to equipment can occur.
17.1
REMOVE BUSHING ( 1 ) FROM
HOUSING ( 2 ).
a.
Using oven, heat housing ( 2 ) to
270 - 300F
(1 32 - 149 C).
b.
Using gloves, place housing ( 2 ) closed
face upon two wood blocks
Using drive punch and hammer, remove
c.
20. INSPECT DISCONNECT CLUTCH
and discard bushing ( 1 ).
ASSEMBLY.
18. DELETED.
a. Inspect assembly, hardware and inserts.
See page 2-5.
19. CLEAN DISCONNECT CLUTCH
b. Repair inserts if damaged. See task
ASSEMBLY.
REPAIR PISTON DISCONNECT
a. Clean assembly and hardware. See
CLUTCH HOUSING INSERTS,
ASSEMBLE
WARNING
Do not handle hot or cold
parts without protective
gloves. Personnel can be
injured.
20.1 INSTALL NEW BUSHING ( 1 ) IF
REMOVED.
a. Using dry ice, cool new bushing ( 1 ) to
approximately 110F ( 79 C).
b. Using oven, heat housing ( 2 ) to
270 - 300 F (132 - 149 C).
c. Using gloves, place housing ( 2 ) open
face upon two wood blocks.
d. Using plastic-faced hammer, tap
bushing ( 1 ) into housing ( 2 ).
GO TO NEXT PAGE
Change 3
4-86.1 (4-86.2 blank)
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals