 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
21. IF GEAR (1) WAS REMOVED, HEAT GEAR
TO 200 F (93 C) IN OVEN FOR
30 MINUTES. IF NOT, GO TO STEP 30.
WARNING
Do not handle hot or cold parts
without protective gloves.
23. POSITION GEAR (1).
Personnel can be injured.
a. Aline screw holes of gear (1) and
housing (2).
b. Install three washers (3) and screws (4)
22. USING GLOVES, REMOVE
in every other mounting hole to aline
GEAR (1) FROM OVEN AND
gear (1). Do not tighten.
PLACE HOUSING (2) ON GEAR.
24. PRESS GEAR (1) ONTO HOUSING (2).
a.
Set up housing (2) in arbor press on
two wood blocks.
b.
Using arbor press, press on gear (1).
25. REMOVE THREE SCREWS (4) AND
WASHERS (3).
c.
Let parts cool to room temperature.
GO TO NEXT PAGE
4-87
Change 3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals